Comprehensive ISO milling cutter programme for tool and mould making
At a glance
  • Round insert milling cutters, high-feed and 90° shoulder milling cutters, ball and toric end milling cutters as well as finishing milling cutters are available as standard
  • For roughing and finishing machining cast iron, steel, stainless steel, non-ferrous metal as well as hardened workpiece materials up to 65 HRC
  • CVD and PVD-coated cutting materials
  • Arbor, end and screw-in milling cutters are available
Advantages
  • Cost-effective, efficient machining high
  • Process reliability and flexibility
  • Very smooth running
  • Very long tool lives
Comprehensive ISO milling cutter programme for tool and mould making

MAPAL announces a new programme of milling cutters with ISO indexable inserts. This programme includes round insert milling cutters, high-feed and 90° shoulder milling cutters, ball and toric end milling cutters as well as finishing milling cutters for machining cast iron, steel, stainless steel, non-ferrous metal as well as hardened workpiece materials up to 65 HRC. Depending on the material to be machined and the requirements, different cutting materials and coatings are used.

Included in the programme is a round insert milling cutter that is ideally suited to roughing and pre-finishing. The round inserts are installed in a neutral position. It is thus possible to machine contours highly precisely. The soft cutting behaviour ensures low vibration machining.

For roughing with very high removal rates and extreme feeds, MAPAL is announcing a milling tool with a tool body that can be equipped with indexable inserts both for high-feed milling and also for 90°-shoulder milling. They are optimally suited to roughing in deep cavities and for use on less stable machines.

A further tool body in the new programme can be used as a universal milling system both with ball and toric inserts for pre-finishing and finishing. Thanks to the highly accurately manufactured insert seats and the vibration damping in the tool body, the milling cutters produce perfect surface finishes.

The new finishing milling cutter has been developed specially for 90° surfaces, face surfaces and contours. Due to the small corner radii it exploits its strengths particularly in steep areas if there is a high radial pressure acting on the tool.

News brochure "Innovations 2020"

Download the brochure with the current product news on your PC.

back back     top top
Besuchen Sie MAPAL im Social Web: